---------------2022/02/21 Release 0.3.50.0-----------------
Purpose: 
Change: 
      1) Add VW config to support new board.

Fix Bug: 

---------------2022/01/20 Release 0.3.49.0-----------------
Purpose: 
Change: 
      1) Add audio reset GPIO to AudioConfig.
      2) Configure table version:  0xF0000017.

Fix Bug: 
      1) If the configuretable is not configurated the HDMI or Output0, read the configuretable ,the check box will be checked in FastConfig.
      2) The input box of Power Mode Detect GPIO in MISC is read-only.

---------------2021/12/03 Release 0.3.48.0-----------------
Purpose: 
Change: 
      1) Add monitor type to fastconfig.
      2) Change:CONFIGURATION_TABLE_VERSION  0xF0000016.

Fix Bug: 


---------------2021/12/01 Release 0.3.47.0-----------------
Purpose: 
Change: 
      1) Add the time stamp of loading or generating FW binary.
      2) Add the time stamp of creating the configure table.
      3) Add Board ID to DefaultInfo.
      4) Add Force VIC in Monitor config.
      5) Support JLink_V644g to improve the loading speed.
      6) Support to show the generating date of the configure table.
      7) Change:CONFIGURATION_TABLE_VERSION  0xF0000015.

Fix Bug: 
      1) If delete the self reset setting value of FastConfig, and the corresponding setting will not change.

---------------2021/09/23 Release 0.3.46.0-----------------
Purpose: 
Change: 
      1) Add fast configure page for FW configuration.
      2) Change:CONFIGURATION_TABLE_VERSION  0xF0000014.

Fix Bug: 

---------------2021/09/10 Release 0.3.45.0-----------------
Purpose: 
Change: 
      1) Add a transmitter STDP2600 for HDMI
      2) Change:CONFIGURATION_TABLE_VERSION  0xF0000013.

Fix Bug 
      1) When the  version is larger than 9, the comparison is wrong.
      2) Some monitor configuration will wrong(resetpin, max_pixel_clock, reset_time,clone_to_output),when switch monitor 0 to monitor 1.


---------------2021/08/24 Release 0.3.44.0-----------------
Purpose: 
Change: 
      1) Add clone output for three monitor outputs.
      2) Add ACM_CS42L42.
      3) Change:CONFIGURATION_TABLE_VERSION  0xF0000012.

Fix Bug 
      1) #4515: FW in board is v2.0.32.0-release package v2.1R031, use MPTool 0.3.42.0 to update FW-v2.7.2.0-release package v2.7R002 by USB, successful, do not re-power USB adapter, get FW version is v2.7.2.0 
      2) #4517: Read FW ROM from USB adapter by MPTOOL, if SROM on board is 8 MB, set SROM size of MPTOOL to 4MB, read FW bin file, the bin file will be 4MB . Test with MPTool v0.3.43.0, FW V2.7.3.0- release package v2.7R003
      3) #4518: Use board which SROM is 8 MB, set SROM size of MPTOOL to 16MB, Write ROM(USB) by a 16MB FW bin file can success, and board will dead. Test with MPTool v0.3.43.0, FW V2.7.3.0- release package v2.7R003



---------------2021/07/06 Release 0.3.43.0-----------------
Purpose: 
Change: 
      1When load or USB update the FW, if the fw can't get the actual srom size, need the customer confirmed.

Fix Bug 
      1Press Enter or Esc, and the application will exit.
      2USB update fw, get current version wrong, need to get the current running fw version, not the srom version.

---------------2021/06/30 Release 0.3.42.0-----------------
Purpose: 
Fix Bug 
      1V0.3.41.0 USB Update FW failed, because check actual srom size not match.


---------------2021/06/22 Release 0.3.41.0-----------------
Purpose: 
Change: 
      1Added monitor transmitter reset time;
      2Check actual SROM size before Load or update firmware.

---------------2021/06/18 Release 0.3.40.0-----------------
Purpose: 
Change: 
      1) Support to set audio version.
      2) WinUSBDriver add device name USB\VID_090C&PID_768A&MI_04  (DriverVer=06/18/2021,2.0.2.0000)

Fix Bug
      1) V0.3.39.0 loading FW by J-Link or USB will fail except the FW type VideoWall.

---------------2021/06/10 Release 0.3.39.0-----------------
Purpose: 
Change: 
      1Remove the Customer ID Kingroda and sofly, replaced with 'others'.
      2Add some printing that reads information about the width and height of the selected Logo.
      3)  VideoWall v1 only support the golumb format of custom logo.

Fix Bug
      1Bug #4344: Open the MPtool(V0.3.38), set customer logo(3840*2160),click Update FW, SMI devices will not be recognized.


---------------2021/05/19 Release 0.3.38.0-----------------
Purpose: 
Add Feature: 
      1Support to read current running FW version.
      2Support to set Logo light type.

Change:
      1Loading FW by J-Link will fail.

---------------2021/05/14 Release 0.3.37.0-----------------
Purpose: 
Fix Bug: 


Change:
      1) Add configure VW Group ID GPIO.
      2) Change CONFIGURATION_TABLE_VERSION  to 0xF0000011.
      3) Support to choose the logo format (golumb, JPEG) and the logo quality to load the customer logo.




---------------2021/03/31 Release 0.3.36.0-----------------
Purpose: 
Fix Bug: 
    1) FW return the result may cost long time, the MPTool will miss the return result.
    2) Execute the burner exception in two scripts. 


Change:
      1) Change the checkbox description of USB/WIFI.
      2) Add transmitter IC type LT2611.
      3) Add transmitter reset pin GPIO configure.
      4) Add max pixel clock configure.
      5) Add some information to customer(customer ID;Board Type; Output Type);
      6) Change CONFIGURATION_TABLE_VERSION  to 0xF0000010




---------------2020/11/26 Release 0.3.35.0-----------------
Purpose: 
Fix Bug: 
     

Change:
      1) Support new default LOGO logical.
      Load default LOGO picture to FW (4K mode, 1080P mode and 800*600 mode).


---------------2020/10/30 Release 0.3.34.0-----------------
Purpose: 
Fix Bug: 
      1) If don't check the Configure index path, do USB update, the MPTOOL will flash back.

Change:
      1) Change Sensor Config to srom offset 0xF000.
      2) WinUSB support PID 768A, 760A.


---------------2020/10/22 Release 0.3.33.0-----------------
Purpose: 
Fix Bug: 

Change:
      1Support to configure panel sensor.
      2Support sensor interface configure.
      3Support to read Config0 configuration (Current only sensor configure).
      4Configure table version  0xF0000009


---------------2020/10/19 Release 0.3.32.0-----------------
Purpose: 
Fix Bug: 
      1The custom.ID_picture.SROMOffst is uninitialized.

Change:
      1Add audio codec mode 2 for codec WM8960.


---------------2020/8/7 Release 0.3.31.0-----------------
Purpose: 
Add Feature: 
      1Support to configure the panel pixel clock format.

Change:
      1The combo-box of monitor pixel clock format will not set default value when change monitor cfg index. 
      2CONFIGURATION_TABLE_VERSION  0xF0000008


---------------2020/8/4 Release 0.3.30.0-----------------
Purpose: 
Add Feature: 
      1Add Note:
      IT66121_1  PCADR=  0X98
      IT66121_2  PCADR=  0X9A
      2Add Custom logo Mode Width and Hight check;
      3Support to reserve custom logo and ID_picture space in the srom for video wall.
      4Support to configure the monitor pixel clock format.

Change:
      1Change the configure table Monitor Type to combo-box..
      2 Remove the Initial of firmware_key_buffer1 in USB Update to make sure the same as the JLink.
      3If delete the audio codec model configure, the value is set 0xffffffff.
      4CONFIGURATION_TABLE_VERSION  0xF0000007

---------------2020/5/27 Re-Release 0.3.29.0-----------------
Purpose: 
Add Feature: 
      1Add transmitter type IT66121_1; IT66121_2;

---------------2020/5/26-Release 0.3.29.0-----------------
Purpose: 
Add Feature: 
      1Add transmitter type IT66121

Change:
      1Replace the original edit control to combo-box.
      2CONFIGURATION_TABLE_VERSION  0xF0000006

---------------2020/3/31-Release 0.3.28.0-----------------
Add Feature: 
      1Pig tail configuration.  
      2Read/write SROM

Change:
      1CONFIGURATION_TABLE_VERSION  0xF0000005.
      2) The data type of struct _USB_PHY_ARRAY_ member is changed unsigned long

---------------2020/2/26-Release 0.3.27.0-----------------
Fix bug: 
1Support to modify display & audio device name to 64 bytes.
2) MPTool pops limitation warning if users input more than 64 bytes for device name.

---------------2020/2/21-Release 0.3.26.0-----------------
Add feature: 
1)Support to modify audio device name.


---------------2020/1/9-Release 0.3.25.0-----------------
Add feature: 
1) Relayout the controls of MPTool.
2) Update the newest User Guide.
Fix bug:
1) Update the structure of SROM_INFO_CUSTOMIZED.

---------------2019/12/31-Release 0.3.24.0-----------------
Add feature: 
1) Add the function to save binary "BL0","BL1_0","BL1_1","BL1_2","FW0","FW1","FW2" in the ROM on the button of 'Check ROM (USB)'.
2) Configure the USBPHY parameter of the configure table by reading the USBPHY.TXT file.
3) Add the function to check the Firmware Type and Custom Logo status in the ROM on the button of 'Check ROM (USB)'.

Fix bug:
1) Init the host_config_file0 for video wall, when do USB Update .
2) If the Bootloader or Firmware don't have the version number information in the binaries, MPTool will print 'Don't have version number!', when checking the srom layout by USB.
3) Audio Codec Config: If change the 'Play or Record' type, Single hole and Double hole Check box will be both enabled.
4) If some of the GPIO configuration values are removed in the edit control box, it will be assigned an initial value '0xffffffff'.(Audio, Monitor and Misc GPIO configure)
5) Display the desktop task bar icon of Firmware Configure Table Window.




---------------2019/12/12-Release 0.3.23.0-----------------
Add feature: 
1) Add the function to check the version of "BL0","BL1_0","BL1_1","BL1_2","FW0","FW1","FW2","Update BL1 Binary Choice","Update FW Binary Choice", ODT status and ConfigureFile Table in the ROM on the button of 'Check ROM (USB)'.
    Note: Please choose the corresponding firmware type when checking the ROM.
2) Add the MPTool version on the UI.
3) Add the host configure file space for Video Wall in the rom.
Fix bug:
1) Configure Table Board ID show the error font.
2) Remove default path of configure file path.


---------------2019/12/6-Release 0.3.22.0-----------------
1)Add feature: Burn FW into Falcon rom with a default serial number like video wall.


---------------2019/12/3-Release 0.3.21.0-----------------
1)Fix Bug: Exchange ODT level value.
   Enable=0x00,Disable=0x01. 

---------------2019/11/29-Release 0.3.20.0-----------------
1)Fix the bug that Audio Codec config: After ticking I2C Interface and inputting SCL/SDA number, then save the configure file and re-open by MPtool again, the I2C Interfaces setting will be blank.
2)Add feature: Design for showing the message about ID over the logo.


---------------2019/11/16-Release 0.3.19.0-----------------
1)Add "InstantView" item for FW Type.


---------------2019/10/17-Release 0.3.18.0-----------------
1)Fix the bug that the app will no respond when updating.
2)Fix the bug that the update will fail if do multiple monitor PNP, when updating.
3)Support maximum window, and set minimum window limit 800 * 600.
4)Re-design Panel configuration. 

---------------2019/7/19-Release 0.3.17.0-----------------
1.The code of reading configure table , audio configure optimize, when the configure table version < 0xf0000003.
2.Update the figure of 4MB new layout about SROM.
3.Add the USB_PHY configure page.
4.Add custom logo refresh rate configure.
5.Add the ODT Setting to Configure Table.
6.Change the configure table version to 0xf0000004.


---------------2019/6/25-Release 0.3.16.0-----------------
1)Remove Check box for Video Wall and changed to select firmware type.
2)Monitor and Panel configure UI Simplify optimization
Add feature:
3)Support check SROM layout by JLink.
4)Add test writing and erasing srom code for new burner.
5)Add read/write HDMI register function.
6)Configure save to F0000003, if the old version less than F0000003.
Fix bug:
7)When update firmware by USB, clear the video wall key buffer1.

---------------2019/5/30-Release 0.3.15.0-----------------
1)Support to generate firmware rom file.
2)Support to read firmware srom bu USB.
3)Add some code for check srom layout by USB and JLink.
4)Redress the original error (configure table srom layout reserve size is 8k),the actual size is 12k.


---------------2019/5/13-Release 0.3.14.0-----------------
1)Support single or double of audio configure.
2)Remove the ConfigureIndex.
3)Fix the bug:the enable or disable state of panel ready gpio , when read configure table.

---------------2019/4/19-Release 0.3.13.0-----------------
1)Add some update warning.
2)Support monitor pnp on updating.
3Modify the winusbdriver infor.


---------------2019/4/4-Release 0.3.12.0-----------------
1)Added firmware configuration file path select.
2)Fixed the issue that firmware type check error.

---------------2019/4/3-Release 0.3.11.0-----------------
1)Panel add some GPIO.

---------------2019/4/3-Release 0.3.11.0-----------------
1)--Add Broad ID.
2)--Refine the Configure Table Structure and allow to multiplex gpio interface.

---------------2019/4/2-Release 0.3.11.0-----------------
1)--Add Firmware key for Video Wall.
2)--Redefine the Configure Table.


---------------2019/3/22-Release 0.3.10.0-----------------
1)Configure Table Monitor Transmitter mode: STDP4028.
2)Update the latest protocol.
3)Add the final update result print of multi-adapter UpdatebyUSB.
4)Support to update old firmware(read bulk in) and new firmware(read interrupt in) by USB. 
5)Add Configure Table Monitor Transmitter Port Type: UART.

---------------2019/3/9-Re-Release 0.3.9.0-----------------
1)add a version for configuration table.
2)Fix the bug:Monitor0 transmitter port type can not show.

---------------2019/3/9-Release 0.3.9.0-----------------
1)Re-define Firmware Configure Table.
2)Modify CMD BULK_ACCESS_SROM_ACCESS.
3)Modify some print information of load FW.
4)This do not support USBUpdate.

---------------2019/1/28-Release 0.3.8.1-----------------
1)Modify the monitor type.
2)Add the crystal option

---------------2019/1/16-Release 0.3.8.0-----------------
1) Add Firmware Configure Table.


---------------2019/1/3-Release 0.3.7.0-----------------
1) Fixed the issue about update Driverless firmware by USB, it show can not found device.
2) Fixed the bug about MPTool locate folder path can't include blank space.

---------------2018/12/14-Release 0.3.6.0-----------------
1Added firmware path select;
2Fixed the bug that firmware path can not include blank space;
3Fixed the issue about MPTool must work on c disk.

---------------2018/12/7-Release 0.3.5.0-----------------
1)Added  firmware type choose.

---------------2018/11/13-Release 0.3.4.0-----------------
1)Added usb update support for Driver-less firmware


---------------2018/11/16-Release 0.3.3.0-----------------
1)Added check audio hot plug active.
---------------------------------------------------------

---------------2018/11/15-Release 0.3.2.0-----------------
1)Added check audio codec present.
---------------------------------------------------------

---------------2018/9/20-Release 0.3.1.0-----------------
---------------------------------------------------------


---------------2018/9/20-Release 0.3.0.0-----------------
1)Re-define load/update firmware data structure.
---------------------------------------------------------


---------------2018/9/13-Release 0.2.11.0----------------
1)Disable VID change;
2)Added VID/PID/DisplayName default value.
---------------------------------------------------------


---------------2018/9/5-Release 0.2.10.0----------------
1) Added enable ODT function;
2) Added input VIP/PID limitation.
---------------------------------------------------------


---------------2018/8/31-Release 0.2.9.0----------------
1) Add custom HW informantion 
---------------------------------------------------------



---------------2018/8/9-Release 0.2.8.0----------------
1)  Refine the MP-Tool UI.
2)  Fixed the issue that host update firmware exist overrides the custom logo risk.
3)  Fixed the issue that MPTool crash after load firmware complete.
---------------------------------------------------------


---------------2018/7/19-Release 0.2.7.0----------------
1)  Refine the MP-Tool UI.
2)  Fixed the issue that it failed to load custom logo.
---------------------------------------------------------


---------------2018/4/20-Release 0.2.6.0----------------
1)  Fixed the bug that sometimes it failed to generate serial number when can't connect network time server.
2)  Added load firmware0;
3)  Release for v0.2.6.0 version.
---------------------------------------------------------


---------------2017/11/21-Release 0.2.5.0----------------
1)  Disable load bootloader;
2)  Self allocating SROM space supported;
3)  Release for v0.2.5.0 version.
---------------------------------------------------------


---------------2017/11/3-Release 0.2.4.0----------------
1) Added custom logo feature;
2) Add serial number to FW support;
3) Added update firmware feature.
---------------------------------------------------------


-------------2017.08.14 Start by Lucy---------------------

1.Added set adapter power on case(For normal mode);
2.Supports change firmware from normal mode to test mode;
3.Added print edid info function;
4.First release for v0.0.1.0 version.

------------------- End by Lucy---------------------------


-------------2017.08.05 Start by Lucy---------------------

1.Porting DDK to MP Tool;
2.Porting Load firmware code to MP Tool;
3.MP Tool support features as shown as following:
     a. Load firmware/bootloader;
     b. Chip/Board validation:
             --- Test memory;
             --- Test mode;
             --- Test 2d;
             --- Test JPU;
             --- Test VPU
             --- Test DMA;
             --- Test EDID.

4.First version:v1.0.0.0

------------------- End by Lucy---------------------------